GMN SEALS – SERIES L/M
Design L
The L design is particularly suited for use with normal spray load for rotating shafts and hubs.
Technical data:
- Outer ring: Aluminum (GD AlSi 12)
- Inner ring: Non-alloy steel
- A range of temperature: -40 °– 200 °C
- Shaft diameter: 15 – 210 mm (customized solutions until max. 270 mm)
- Width: 10, 14, 15, 20, 22 mm (depending on size)
- Gap height: Constantly 0.2 – 0.5 mm (depending on size)
- Sealing gap: Horizontal
- Axial play: Sax see table of dimensions (total axial movement from one end position to the other)
- Increased axial clearance:Sax – 1.5 x Sax (on request all types are also available with increased axial play) order name: L dxDxB with increased axial play
- Radial clearance: Srad = Sax /tan (42.5°)
Design M with drainage groove
The M design has grooves on the circumference which are used to remove and return penetrated liquid during heavy and direct spray impact.
Technical data:
- Outer ring: Aluminum (GD AlSi 12)
- Inner ring: Non-alloy steel
- A range of temperature: -40 °– 200 °C
- Shaft diameter: 15 – 210 mm (customized solutions until max. 270 mm)
- Width: 10, 14, 15, 20, 22 mm (depending on size)
- Gap height: Constantly 0.2 – 0.5 mm (depending on size)
- Sealing gap: Horizontal
- Axial play: Sax see table of dimensions (total axial movement from one end position to the other)
- Increased axial clearance:Sax – 1.5 x Sax (on request all types are also available with increased axial play) order name: L dxDxB with increased axial play
- Radial clearance: Srad = Sax /tan (42.5°)
